Photographers can use the WR-T10 to simultaneously release the shutter on multiple Nikon DSLR cameras that have a WR-R10 unit attached and have been paired with the WR-T10.

One WR-T10 unit can be paired with an unlimited number of cameras with a WR-R10 unit attached.

Three radio frequency channels are available for use, to prevent interference when multiple pairings or photographers are shooting in one location.

When the WR-R10 is used along with the WR-A10 WR Adapter to connect to select Nikon cameras with a 10-pin connector, one camera can be designated as “master” and control the shutter release of up to 64 WR-R10 transceiver units.

Useful for triggering the shutter remotely when using slower shutter speeds, to prevent camera movement.

Range (line of sight) from the WR-T10 to WR-R10s is 66 feet (20 meters).

Range (line of sight) from WR-R10 (used with the WR-A10 WR adapter on select DSLRs, and acting as a master unit) to WR-R10s is 164 feet (50 meters).

The WR-R10 can also be used to control radio-controlled flash units with the D5 and D500 DSLRs with firmware version 3.00 or later. Connected to the camera using the WR-A10, the WR-R10 is easily paired with the SB-5000 Speedlights. When controlling the Speedlights, you can pair up to 18 Speedlights to the WR-R10 on the camera. Two link modes are selectable: PIN (mainly for pros) and Pairing. Communication distance between the WR-R10 on the camera and the Speedlight is approx. 98 ft. /30 m.

Find out more about the WR-R10.Find out more about the WR-T10.Find out more about the WR-A10.Find out more about the WR-1.

View a video tutorial on setting up and using the WR-R10/WR-T10/WR-A10 Wireless Remote Controller.